HITORK electric actuator HKP series;

Electric ControlElectric Control

Driver

Deceleration

Handwheel section

Electric Control is composed of :display

switch knob

Control knob

demonstration

Operation interface

Travel settings

First, turn the handwheel to the closed position

Rotate the needle clockwise to the closed position and return to two circles

one

two

back to interface

enter

Confirm

Confirm

0 Input code is 0

ok

enter menu

Confirm entry again

Valve closing limit

Confirmed. Now that the valve is closed, it has been confirmed

Set valve opening limit

Shake the handwheel in the open direction

Shake well until it can’t shake back two times

back to the display screen

Entering the limit position

next

Valve opening limit

Press enter to confirm saving

Good display interface for 100 separate valves

Return to the initial interface

it appears

set successfully

Electric knob

Electronic control part control

Turn the red knob to the scene

Control with black switch knob

Off direction

actuator

is now power-off

Now the black knob is operating in the open direction

The electric actuator is now fully open